No products in the cart.
Beehive Frame Wiring Jig to keep the frame steady and in place. Makes it easy to thread your wire through, rolls out the wire from the spool as needed.
In stock (can be backordered)
Check out our Shipping terms for information and costs of shipping our products
If you are wiring your own frames, you will need a frame wiring jig. This is perfect for the traditionalist and DIY beekeeper using wax foundations. It keeps the frame steady and in place, making it easy to thread your wire through, rolls out the wire from the spool as needed. These are easy enough to make, but avoid the hassle with this ready to go, tried and tested design.
You may also be interested in ou new Deluxe Wire Embedder.
(verified owner) – March 17, 2020
It was very poorly put together. The frame part was 10 to 15 degrees off square. I cut through the welds put it square and re- welded it. One of the pulleys had large lumps, of whatever material they are made from, sticking out from the groove and side of the pulley. I ground these lumpy bits off with an angle grinder. Burrs and sharp edges had not been ground off. The paint job was also very poorly done.
(verified owner) – November 23, 2020
(verified owner) – April 27, 2022
You must be logged in to post a review.